Brodit 527820 Active Car Holder for iPad Pro 12.9 - Molex Adapter
Keep the interior of your car neat with Brodit's Active Car Holder - thanks to the Molex adapter system, you can keep all the messy cables inside the dashboard!
- High quality car holder, excellent during long trips
- Keep your smartphone charged while on-the-go
- Adjust the tilt to avoid sunlight hitting the screen
- Easy to install and simple to use
- Built-in LED charging indicator
- Use the Molex adapter to charge your smartphone or to connect an adapter for additional features
- Input power: DC 12V
- Output power: DC 5.75V - DC 5.3V, 2A
- Over voltage, over current and short circuit protection
Holder installation instructions:
1. Loosen the screw in the center of the holder, in order to remove the tilt swivel attaching plate.
2. Place the attaching plate onto the desired position and install it using the included screws.
3. Place the holder over the attaching plate so that the center screw fits in the tilt swivel hole, and turn the screw a few times.
4. Tighten the screw, until the holder is firmly mounted, but in such a way that it can still be adjusted.
Molex adapter installation instructions:
- Important note:
The charger unit is fused internally with 2A automotive re-settable thermal fuse. If you install an external fuse, then connect a 2A fuse holder and fuse in-line with the Red wire close to the power source. Secure the charger unit into the dashboard using the adhesive tape in a well ventilated area that does not get hot.
1. Connect the White wire to a negative ground connection or on the vehicle chassis.
2. Connect the Red wire to a 12V-24V power supply that is controlled by the ignition switch of the vehicle.
Each holder requires a ProClip mount (not included in the package). Please purchase the correct ProClip mount for your car separately.
This product is compatible with:
iPad Pro 12.9
FIND A DASH MOUNT FOR THIS MOBILE HOLDER HERE >>>