Brodit 514663 Car Holder with Cable Attachment for iPhone XS Max, iPhone 8 Plus, iPhone 7 Plus, iPhone 6S Plus, iPhone 6 Plus
Use this car holder from Brodit to put your iPhone within an easy reach during road trips and keep it charged. Adjust the viewing angle thanks to the tilt swivel. It has a cable attachment for your original Lightning cable.
- Use your original Lightning cable to recharge your device while in the car holder (cable is not included)
- High-quality and useful car holder from Brodit
- You can adjust the viewing angle thanks to the integrated tilt swivel
- It holds your iPhone within an easy reach
- You can still use your iPhone freely while in the car holder because port, buttons, and camera are easily accessible
- Please purchase a ProClip mount separately to install the holder in your vehicle properly
1. Place your Lightning cable in the hole in the lower part of the holder and press-lock it in place carefully. Then loosen the bolt in the centre to remove the tilt swivel.
2. Put the attaching plate in the desired position and secure it using enclosed screws. Put the car holder over the plate and tighten the centre screw, but leave it a bit loose to adjust the angle.
3. Installation of the device: Place the upper part of your iPhone first and slide up. Then put the lower part straight over the Lightning connector and press down carefully until you hear or feel it snaps in place. To remove your device, pull it upwards to detach the cable and take out the lower part first.
4. The car holder and cable are installed properly and ready to use.
- iPhone XS Max 6.5"
- iPhone 8 Plus 5.5"
- iPhone 7 Plus 5.5"
- iPhone 6S Plus 5.5"
- iPhone 6 Plus 5.5"
Find a dash mount for this mobile holder here >>>