Design Your Own Case FOR MOBILE OR TABLET! CLICK HERE
Log out Hi , you are now logged in.
0
Design Your Own
CASES & GADGETS
My Basket0 total £0.00 
 
Fast deliveryFast delivery 30 Days Return Policy30 Days Return Policy Customer Service 09AM-09PMCustomer Service 09AM-09PM Club Trendy - Get 7% offClub Trendy - Get 7% off

iPhone 4S Back Panel Replacement

Rear Panel

Send this link via e-mail

Step 1 - Rear Panel

  • Prior to disassembling your iPhone, make sure to turn it off.

  • Two 3.6 mm Pentalobe screws next to the dock connector need to be removed

  • While assembling the phone again, we suggest you to replace the 5-point screws with equivalent Phillips screws.

  • The 5-Point Screwdriver is meant to be used only once, as it may strip the screws.

thumb image 1
thumb image 2

Step 2

  • Press the back panel and push it towards the top edge of the iPhone.

  • Back panel will move about 2 mm.

Step 3

  • Separate the back panel from the back of the iPhone, and make sure not to damage the plastic clips fixed to the back panel.

  • Remove the back panel from the iPhone.